المواد الإستهلاكية
No Edge Blending Tape
Designed with a non-stretch construction, this no-edge-blending tape enables accurate masking along swage lines and panel edges, minimizing overspray and eliminating hard paint edges for a uniform finish across new and original paint surfaces.
- Seamless blending from old to new paintwork, eliminating rework
- Paint absorbent, leaving no hard paint edges
- Feathered edge over longer lengths for a consistent finish
- No need for folded tape, saving time and avoiding inconsistencies
- Temperature resistant to 248°F/120°C, suitable for low or high bake ovens and infra-red drying systems
- Non-stretch properties ensure no unwanted elongation
Smooth Edge Foam Masking Tape
Smooth Edge Foam Masking Tape represents the initial generation of foam masking technology, providing effective overspray prevention through a simple and reliable foam construction.
- Enables fast and efficient aperture masking to dramatically reduce process time
- Paint absorbent to help create a soft finish
- Temperature resistant to 185°F/85°C, suitable for low bake ovens
- Available in 2 convenient sizes for use on standard and commercial vehicles
- Quick and easy removal, leaving no adhesive residue
T-TAPE Foam Masking Tape
With its flat T-shaped surface and graduated edge design, T-TAPE Foam Masking Tape enables a smooth feathered finish, minimizing paint accumulation while enhancing overall application efficiency.
- T-shape design with graduated edge creates a feathered finish and prevents hard edges
- Ideal for vehicle apertures including B & C posts, bonnets and boots
- Specifically formulated adhesive for seamless repositioning and clean removal with no residue
- Flexible closed cell foam makes it easy to manipulate around vehicle contours with paint bleed
- Finger lift edge for easy and simple removal of liner
- Supplied as one continuous length to prevent wastage
Perforated Plus Trim Lifting Tape
Designed for demanding trim applications, JTAPE Perforated+ Trim Lifting Tape delivers additional lifting leverage through its higher-grab adhesive and reinforced plastic edge construction.
- Specially formulated high grab adhesive to prevent lifting on a wide range of substrates
- Thicker plastic edge provides increased leverage for robust rubbers and trims
- Perforated sections allow for easy tearing, so there’s no need for a blade or scissors
- Offers excellent flexibility, ideal for following contours and tight corners
- Translucent substrate enables visibility to the surface below
- Quick and easy removal, ensuring no adhesive residue is left behind
Green Fine Line Masking Tape
Developed for precision refinishing, JTAPE Green Fine Line Masking Tape ensures consistent, sharp paint separation in detailed and multi-color paintwork.
- Ideal for straight lines whilst also remaining flexible to easily curve
- Can be applied over newly painted surfaces due to its rubber-based, pressure-sensitive adhesive
- Temperature resistant up to 302°F/150°C for use in high bake ovens
- Safe to use with water, solvent and enamel-based paints to suit a variety of applications
- Prevents bleeding, creeping and spidering for a sharp, defined paint line every time
- Suitable for all types of automotive, marine, aerospace decorative and industrial paint systems
- Can be cleanly removed, leaving no adhesive residue
Grey Double Sided Acrylic Tape
Designed for professional use, JTAPE Grey Double-Sided Acrylic Tape offers dependable adhesion and flexibility, ensuring effective mounting performance in all operating environments.
- Strong adhesion to easily bond emblems, nameplates, plastic panels and metals
- High strength performance reinforced acrylic adhesive ideal for all weather conditions
- Closed-cell foam construction to suit internal or external fixtures
- Excellent temperature resistance ranging from -4⁰F (-20⁰C) to 356⁰F (180⁰C)
3M Hookit Flexible Abrasive Foam Disc
3M™ Hookit™ Flexible Abrasive Foam Discs combine flexible aluminium oxide abrasives with a soft foam backing to create a high performing, versatile blending abrasive for wet or dry use by hand or machine.
3M™ Hookit™ Flexible Abrasive Foam Discs are composed of a soft foam which conforms to irregular surfaces and is comfortable to use by hand.
It can be used wet or dry and by hand or machine in blending applications. 3M™ Hookit™ Flexible Abrasive Foam Discs and Sheets have excellent dust and water control thanks to hundreds of laser-perforated holes ensuring a clean, dust-free working environment. These discs have excellent cut and finish.
Extremely versatile blending abrasive
Can be used wet or dry
Suitable for use by hand or machine
Excellent Dust and water control
3M Leather and Vinyl Restorer
3M™ Leather and Vinyl Restorer deep cleans dirt and grime from all vinyl, leather, rubber and plastic surfaces. It wipes away residue and deposits that tarnish the appearance of car seats, arm rests, trim and other interior components. It deep cleans so that the interior of your vehicle looks, feels and smells like new.
Renews the appearance and feel of leather and vinyl
Dual-purpose product cleans and conditions
Lemon scent freshens car interiors
Easy-to-use formula
Spray On, Wipe Off
3M Perfect-It Fast Cut Compound
3M™ Perfect-It™ Fast Cut Compound is a coarse compound for use on refinish paints to remove sanding scratches after flatting or denibbing with 3M 260L P1200 or P1500 abrasive discs or 3M Microfine 1500 and 2000 wet sanding paper.
Quickly and effectively removes any marks left by abrasive sanding .
Fast cutting
Gives a high gloss finish
Easy to clean off surfaces
Low sling
Removes overspray
Can be followed by machine polish, eg 09548.
3M Perfect-It Fast Cut Plus Extreme
3M™ Perfect-It™ Fast Cut Plus Extreme is a fast cutting abrasive liquid compound designed to quickly remove sanding scratches after flatting or denibbing process with 3M 260L P1500 then Trizact 3000 and obtain high gloss on both fresh or aged car paint. Use with a rotary or orbital polisher equiped with a green pad from 3M™s colour coded compound range.
Our 3M™ Perfect-It™ Fast Cut Plus Extreme is one of the latest generation of award-winning colour coded compounds, designed for all kinds of paint rectification or restoration work, such as oxidation, surface scratches, car wash scratches, etc. Achieves a superior gloss finish.
Exceptional fast cut-rate performance.
20% to 25% less product required than standard Fast Cut + / XL to polish the same area.
Get a superior high gloss finish and remove overspray.
3M Perfect-It Foam Compounding Pads
3M™ Perfect-It™ Foam Compounding Pads are the highest-performing double- and single-sided foam compounding pads we offer. They are an integral part of our 3M™ Perfect-it™ Paint Finishing System – developed for when the finest finish is required for every level of clear coat and paint repair.
Our system uses a progressive series of abrasives, buffing and compounding pads, and proprietary polishes across four stages of repair to produce show-room grade finishes with deep color and rich gloss.
Our highest-performing foam compounding pads.
Works with 3M™ Hookit™ and Quick Connect attachment systems for easy change-outs.
Diameters as small as 3” for accuracy in tight spaces or small areas.
Foam construction holds polish, prevents slinging for faster, cleaner results.
Part of the 3M™ Perfect-It™ Paint Finishing System for showroom grade finishes.
3M Perfect-It EX Ultrafine Machine Polish
Our 3M™ Perfect-It™ EX Ultrafine Machine Polish quickly and completely removes ultrafine swirl marks, even on difficult dark-colored vehicles. It stays wet longer, letting you use less material for a refined finish. Yet it also holds better on the pad for reduced sling and faster cleanup.
You get polished surfaces without machine polish swirl marks – all at lower material costs and process times.
3M’s highest-performing machine polish for removing ultrafine swirl marks.
Quickly and completely removes machine polish swirls, even on black vehicles.
Longer wet time – technicians use less material, saving money.
Holds better on polishing pads for reduced sling, mess and cleanup time.
Produces a swirl (“hologram”) free finish even on black vehicles.
3M Perfect-It EX Ultrafine Machine Polish
3M Wetordry Abrasive Sheet 401Q
3M™ Wetordry™ Abrasive Sheet 401Q is designed for sanding applications that require a fine grit and a light touch, such as auto body wet sanding and paint finishing. It combines our durable, waterproof A-weight paper backing and our fast-cutting silicon carbide mineral for consistent scratch patterns, making for easier buffing. And a range of grades up to 3000 grit allows for superior results.
Convenient sheet can be used wet or dry on paint, primer, gel coat and metal.
Waterproof backing supports wet applications for decreased loading and a faster cut.
Silicon carbide mineral is 3M’s fastest-cutting abrasive for a superior finish.
Range of fine grades from 1000 up to 3000 for the most professional results.
Available in 9” x 11” and 5-1/2” x 9” sheets for a variety of uses.
3M Wheel and Tire Cleaner
3M™ Wheel and Tire Cleaner is formulated to meet the special challenges of cleaning wheels and tires, in one easy step. This powerful solution removes even the most difficult buildup from the road – brake dust, road tar, grease, grime and more. With a simple pull of the spray trigger and a light scrub, you can remove scuffs from tire sidewalls and polish wheels to a brilliant "like new" shine.
Quickly and safely cleans wheels and tires in one easy step.
Removes brake dust, road tar, grease and grime.
Cleans tough scuffs and soil from tire sidewalls.
Leaves wheels with a brilliant shine.
Auto Fine Line Masking Tape
Automotive fine line masking tape for professional applications with drying cycles at high temperatures up to 120°C (60 min.). Clean, razor sharp lines. Thanks to its conformability, PPM automotive fine line Masking Tape 5040 is suitable for small and curved car body parts like profiles, bumpers, head & bottom lights and car handles.
It can be applied to different surfaces like aluminum, plastics, rubber and glass, guarantees high adhesion and doesn’t leave adhesive traces when removed. Fine line Masking Tape 5040 is specifically recommended for all applications with extremely narrow grooves where other traditional masking products don’t perform.
Size: 1 inch | 2 inch.
Auto Plus Masking Tape
Professional car refinish masking tape. Heat resistant up to 80°C. Removable without any residues.
Size:
1 inch |
2 inch.
Masking Film White
Professional white car refinish masking plastic. Static, paint adhearing, tear resistant and IR-proof.
Size:
4,8m x 120m |
5.0m x 120m |
4.0m x 300m.
Masking Paper Premium
40 gr Natron Kraft paper for all paint works. Virgin Kraft, without recycled fibres. For all paint systems. Special surface treatment.
Size:
20cm x 450m |
60cm x 450m |
90cm x 450m.
Mixing Cups
Disposable transparent mixing cup with mixing scales for all paint materials.
No Edge Blending Tape
Combination of masking- and foamtape, to avoid hard paint edges. Heat resistand up to 110°C.
Size: 20mm x 5m
Cabin Guard
Coating for interior walls, ceilings, lighting, etc. in paint booths. Produces a transparent, sticky protective layer that binds dust and overspray. Water soluble. Biodegradable.
Cleaning Paper Blue 3 PLY
3-ply cleaning cloth, wet and tear resistant, very absorbent, lint-free, layers glued.
Degreasing Cloth Turquoise
Lint-free, highly absorbent and solvent resistant cloth. Can be used for cleaning and degreasing. Box with 150 folded cloths.
Latex Glove High Risk
Powder-free chemical protection glove made of extra strong natural latex. With rolled edge, extremely tear-resistant, very good fit. Dispenser box with 50 gloves.
AR 
EN